Request for Quote

Kindly fill in this RFQ form and we will be in touch with you.

Customer :*
RFQ Ref :*
PCB Code :*
PCB Class:
PCB Type*
PCB THICKNESS*       If others, specify   
Size of Individual Card*  
Size of Matrix/panel*  

Quantities:*     PCBs  Nos;

Panels  Nos
Laminate:*     FR 4     Others If others, specify
Base Copper:*
Outer layer   

Inner layer

 

If Others, specify

No. of Holes per PCB*  
Minimum Hole Diameter.*
SMD pad Component side.
SMD pad Solder side
SMD Pitch
Track width minimum
Gap width minimum
Solder Mask:*
Solder Mask Color:*
      Green     Others 		If others, specify  
Legend Printing*
(Silk Screen Component Notation): 		Component Side Solder Side
Colour:*    White    Others If others, specify  
Copper Plating
Plated Through Hole Copper Thickness  microns ( Tolerance +/- )
Finished Cu Thickness on Surface including Base Copper  microns ( Tolerance +/- )
Consent for Modifying Pattern Design Without Effecting Circuit Connectivity Inorder to Achieve Uniformity in Plating Isolated Tracks and Pads Granted
Not Granted
Protective Finish*
SMOBC with HASL  
Solder Mask On Fused Tin and Lead Tracks and Pads
Solderable Lacquer
Gold and Nickle on Tabs
If others, please specify  
      Minimum Gold Thickness   Microns
      Minimum Nickel Thickness   Microns
Special Features / Processes
Black oxide      Carbon Printing      Peelable
Tolerances
Plated Holes  +/- mm.
Non Plated Holes  +/- mm.
General Tolerance for Profiling  +/- mm.
Track Width Reduction  +/- mm.
Minimum Track Width  +/- mm.
Minimum Annular Ring  +/- mm.
Minimum Air Gap  +/- mm.
Scoring Depth  +/- mm.
Panelization
Single PCB Size mm X mm
Panel size (No. of PCBs Panel)   PCBs/Panel X mm
WEB Around the Panel
Mounting Holes Location on The Web
Minimum Distances Between Consecutive Scoring Lines mm
Number of V-Grooves  
Scoring Depth mm
Can Multiple Panels With Some Crossed out Individual PCB Rejects be Supplied YES    NO
IF YES, Then Maximum No. Of Such Marked Rejects/Panel Permitted nos
Should Such Panels With a Few Rejected PCBs Be Marked And Packed Separately YES    NO
Electrical Testing
Minimum SMD Pitch   mm
Packing Instructions
PCBs To Be Wrapped In Butter Paper
PCBs To Be Wrapped In PE Foil
Number Of PCBs In Each Wrapping / Pack   nos.
Packing Slip To Contain
a) Manufacturer
b) PCB Type & Revision
c) Quantity Packed
Maximum Weight Permitted Per Carton   kgs.
Any Other Special Instructions
NAME*  
DESIGNATION*  
COMPANY*  
E-MAIL*  
PHONE/FAX  
DATE  
Would like to fill in the Additional Information Required for MLB PCB 4,6 & 8 Layers